Microfluidic Device Flow Sensors
Function Overview:
流量感測器專為精密微流體應用設計，與ExiGo、UniGo及4U泵浦完美適配，具即插即用特性。支援主動回饋與PID控制，確保精確穩定的流量輸送，並提供多種流量範圍（1.5μL至1mL）及低閉死容積設計（1μL至25μL），滿足多種研究需求。模組化設計可靈活搭配注射泵與壓力泵，適用於液滴生成、多層流研究、流體動力聚焦及器官晶片研究等領域，為微流體研究提供高效解決方案。
描述
Product Highlights
- Rapid changeover with response time as low as 50ms
- If whole blood or other biological samples are used, then no flow sensor is required to obtain a steady pulseless flow.
- Purge mode with reversible flow or programmable perfusion mode (constant, ramp, step, sinusoidal)
- Programmable via SmartFlo software on PC.
- Integrated pump control on software using LabVIEW, C++, Python, etc.
- Plug-and-play flow sensor for active feedback and precise flow control
- Controlled by iPad mini or PC (LabVIEW, Matlab, Python, etc.), up to 4 pump modules can be controlled or programmed independently.
- Connects to all microfluidic biochips using standard tubing
Technical Parameters
| manipulate | 與 ExiGo、UniGo 和 4U 微流體幫浦連接，即插即用 | ||||
|---|---|---|---|---|---|
| Features | 可監測幫浦流速及其 PID（比例、積分和微分）正回饋控制 | ||||
| 1.5 μL | 7 μL | 80 μL | 1 mL | ||
| 流量測量範圍 | ±1,500 nL/min (≡ 1.5 μL/min) |
±7,000 nL/min (≡ 7 μL/min) |
±80,000 nL/min (≡ 80 μL/min) |
±1 mL/min (≡ 1,000 μL/min) |
|
| 準確度（以較高值為準） |
滿程量的 0.5% 測量值的 10% (7.5 nL/min) |
滿程量的 0.3% 測量值的 5% (21 nL/min) |
滿程量的 0.15% 測量值的 5% (120 nL/min) |
滿程量的 0.2% 測量值的 5% (2 μL/min) |
|
| 閉死容積 | 1.0 μL | 1.5 μL | 5.0 μL | 25.0 μL | |
| Work Pressure | 200 bar | 100 bar | 15 bar | 15 bar | |
| 程式碼 | FS-1.5 | FS-7.0 | FS-80.0 | FS-1000 | |
| sizes | 60 mm (L) x 51 mm (W) x 21 mm (H) | ||||
| weights | <0.1 kg | ||||
| power (output) | 透過電纜連接 ExiGo, UniGo 或 4U 微流體泵 | ||||
Applications
- droplet generation
- 精確的多通道混合、多層流研究
- 流體動力聚焦
- Organ wafer research
- 揮發性有機化合物分析
Honghong will provide you with any support you need!
Our professional Honghong team will be the first to respond and provide you with the best service to solve all your problems.
