ecolog-pro rbr+psu 868(802265)
The ECOLOG-PRO RBR (Radio Bridge) connects to the wireless ECOLOG-PRO data logger and sends encrypted measurement data to the ELPRO Cloud. setup is simple and takes only a few minutes. Simply connect the ECOLOG-PRO RBR to the Internet using an Ethernet cable connection through a modem/router/LAN and register the logger to your ELPRO Cloud account.
| Product Category | Wireless DataCORDER Communication Module |
| Applications | Environmental monitoring of rooms, refrigerators and freezers |
| Wireless Connectivity DataCORDER Maximum | 50 |
| Communication Interval | 1 to 60 minutes; depending on sensor configuration |
| IP Protection | IP20 |
| Environmental Operation: Temperature/Humidity | 0°C ... + 40°C 10%RH...90%RH, no condensation |
| Power Supply | External power supply unit (input: 100-240 VAC / 50-60 Hz; output: 5.9 VDC / 1200 mA) or PoE (Power over Ethernet) |
| showcase | 2 LEDs for connection/communication with ELPRO Cloud and connection/communication with wireless data logger |
| Certificates | Certificates |
| traceability | ID number (traceable to component level) |
| makings | ABS plastic |
| sizes | 137 mm (5.39 inch) x 70 mm (2.76 inch) x 57 mm (2.24 inch) |
| Certifications|Consistency | CE (868 MHz) | FCC (915 MHz) | RoHS |
| Wireless connection to DataCORDER | Available in two versions, 868 MHz or 915 MHz, respectively. |
| With ELPRO Cloud | Ethernet cable via Cat 5e or higher; shielded cable is required for cable lengths > 3 meters. |
| Compatible Wireless Data Logger | ecolog-pro 1ntr, ecolog-pro 2ptr*, ecolog-pro 1thr* |
Description
summarize
Communication modules for radio measurement modules, includingPower supply units.; 868 MHz。It has RJ45 and power connectors.(Excluding Ethernet cables.)
Technical Specifications
| Product Category | Wireless DataCORDER Communication Module |
| Applications | Environmental monitoring of rooms, refrigerators and freezers |
| Wireless Connectivity DataCORDER Maximum | 50 |
| Communication Interval | 1 to 60 minutes; depending on sensor configuration |
| IP Protection | IP20 |
| Environmental Operation: Temperature/Humidity | 0°C ... + 40°C 10%RH...90%RH, no condensation |
| Power Supply | External power supply unit (input: 100-240 VAC / 50-60 Hz; output: 5.9 VDC / 1200 mA) or PoE (Power over Ethernet) |
| showcase | 2 LEDs for connection/communication with ELPRO Cloud and connection/communication with wireless data logger |
| Certificates | Certificates |
| traceability | ID number (traceable to component level) |
| makings | ABS plastic |
| sizes | 137 mm (5.39 inch) x 70 mm (2.76 inch) x 57 mm (2.24 inch) |
| Certifications|Consistency | CE (868 MHz) | FCC (915 MHz) | RoHS |
| Wireless connection to DataCORDER | Available in two versions, 868 MHz or 915 MHz, respectively. |
| With ELPRO Cloud | Ethernet cable via Cat 5e or higher; shielded cable is required for cable lengths > 3 meters. |
| Compatible Wireless Data Logger | ecolog-pro 1ntr, ecolog-pro 2ptr*, ecolog-pro 1thr* |
