ecolog-pro rbr 915 (801426)

The ECOLOG-PRO RBR (Radio Bridge) connects to the wireless ECOLOG-PRO data logger and sends encrypted measurement data to the ELPRO Cloud. setup is simple and takes only a few minutes. Simply connect the ECOLOG-PRO RBR to the Internet using an Ethernet cable connection through a modem/router/LAN and register the logger to your ELPRO Cloud account.

Product Category Wireless DataCORDER Communication Module
Applications Environmental monitoring of rooms, refrigerators and freezers
Wireless Connectivity DataCORDER Maximum 50
Communication Interval 1 to 60 minutes; depending on sensor configuration
IP Protection IP20
Environmental Operation: Temperature/Humidity 0°C ... + 40°C
10%RH...90%RH, no condensation
Power Supply External power supply unit (input: 100-240 VAC / 50-60 Hz; output: 5.9 VDC / 1200 mA) or PoE (Power over Ethernet)
showcase 2 LEDs for connection/communication with ELPRO Cloud and connection/communication with wireless data logger
Certificates Certificates
traceability ID number (traceable to component level)
makings ABS plastic
sizes 137 mm (5.39 inch) x 70 mm (2.76 inch) x 57 mm (2.24 inch)
Certifications|Consistency CE (868 MHz) | FCC (915 MHz) | RoHS
Wireless connection to DataCORDER Available in two versions, 868 MHz or 915 MHz, respectively.
With ELPRO Cloud Ethernet cable via Cat 5e or higher; shielded cable is required for cable lengths > 3 meters.
Compatible Wireless Data Logger ecolog-pro 1ntr, ecolog-pro 2ptr*, ecolog-pro 1thr*

描述

summarize

無線電測量模塊的通訊模塊;915 MHz.It has RJ45 and power connectors.(不包括交流適配器和以太網電纜。)

 

Technical Specifications

Product Category Wireless DataCORDER Communication Module
Applications Environmental monitoring of rooms, refrigerators and freezers
Wireless Connectivity DataCORDER Maximum 50
Communication Interval 1 to 60 minutes; depending on sensor configuration
IP Protection IP20
Environmental Operation: Temperature/Humidity 0°C ... + 40°C
10%RH...90%RH, no condensation
Power Supply External power supply unit (input: 100-240 VAC / 50-60 Hz; output: 5.9 VDC / 1200 mA) or PoE (Power over Ethernet)
showcase 2 LEDs for connection/communication with ELPRO Cloud and connection/communication with wireless data logger
Certificates Certificates
traceability ID number (traceable to component level)
makings ABS plastic
sizes 137 mm (5.39 inch) x 70 mm (2.76 inch) x 57 mm (2.24 inch)
Certifications|Consistency CE (868 MHz) | FCC (915 MHz) | RoHS
Wireless connection to DataCORDER Available in two versions, 868 MHz or 915 MHz, respectively.
With ELPRO Cloud Ethernet cable via Cat 5e or higher; shielded cable is required for cable lengths > 3 meters.
Compatible Wireless Data Logger ecolog-pro 1ntr, ecolog-pro 2ptr*, ecolog-pro 1thr*

 

Document Information

Technical Specifications ECOLOG-PRO RBR

ECOLOG-PRO RBR and 1NTR Operator Manuals