Modbus TCP Client – DeviceNet Adapter
Anybus X-gateway讓您可以在Modbus TCP和DeviceNet網路之間無縫內部連接PLC控制系統以及它們所連接的設備。
Fast copying of I/O data
X-gateway的主要功能是在兩個網路間快速傳輸循環I/O數據。這樣您的PLC無需進行額外的計算工作。該網關在兩個網絡上都作為從站。數據傳輸是完全透明的，每個方向擁有最大數據容量256字節。
Easy to configure - no programming required!
The connection between the two networks is quickly established using the Anybus Configuration Manager software included in the X-gateway. No programming skills are required for the gateway setup. This is because the X-gateway is factory defaulted with a predefined I/O size of 20 bytes.
描述
Features and Benefits
- 在Modbus TCP和CANopen網絡之間快速復制循環I/O數據(5 ms)
- 允許集成基於Modbus TCP的服務器/從站設備到其他的PLC控制系統
- 完全的Modbus TCP客戶端/主站功能，無需Modbus TCP網絡上的PLC控制器
- 最多連接64個Modbus服務器/從站設備
- 每個方向最大I/O數據容量為256字節
- By using data from other connected devices, it is possible to create web pages that display and control processes at the plant level.
- SD內存卡槽支持備份、配置和簡單的模塊替換
- Rugged, self-contained housing for use in harsh industrial environments
- Free worldwide technical support and consultation
Modbus TCP客戶端/主站接口
Modbus TCP客戶端和服務器設置是通過包含的可視web配置界面完成的，無需任何編程。
- 根據Modbus規範V1.1B的Modbus TCP客戶端功能
- 支持Modbus TCP功能1，2，3，4，5，6，15，16，23
- 最多連接64個Modbus TCP服務器/從站
- 支持最大256字節輸入數據和256字節輸出數據
- 10/100Mbit running full or half duplex
- 集成的FTP服務器通過使用標準FTP客戶端可實現簡單文件管理
- Web服務器具有動態數據能力和服務器端包含(SSI)能力
- Email客戶端具有動態數據能力，並可通過事件觸發email處理
- 下行鏈接在線設備列表提供Modbus-TCP傳輸狀態到上行鏈接PLC
- 控制和狀態字用於下行鏈接網絡控制/狀態
- 獨立的Modbus TCP服務器端口號設置
- 字節交換特性
- 完整的Modbus地址範圍(1-65536)
- 同時具有雙Modbus TCP RJ-45端口
DeviceNet Adapter Features
DeviceNet adapter setup can be accomplished through an on-board switch or by importing the supplied .EDS file into the control PLC's engineering tool.
- ODVA's DeviceNet Conformance Test™.
- DeviceNetNet Specification Version: Communication Adapter Specification 12
- Maximum 512 bytes of input data and 512 bytes of output data
- DeviceNet baud rate 125, 250, 500 kbit/s
- Supports I/O slave messages: bit-pass, polling, cyclic, COS, and explicit messages.
- MacID node address setting via DIP switch
- DeviceNet network configuration via .EDS file
- 1x 5-Pin, 5.08 Phoenix Plug Connector
Technical Specifications
| Dimensions (L-W-H) | 114 x 44 x 127mm or 4,49 x 1,73 x 5,00″ |
| Weight | 400g or 0,880 lbs |
| Operating temperature | -25 to +65 °C or -13 to +149 °F |
| Storage temperature | -40 to +85 °C or -40 to +185 °F |
| Power supply | 24 VDC +/- 20% via 2-pole 5.08 mm Phoenix pluggable screw connector |
| Current consumption | max. 400mA (Typical 200mA) |
| Enclosure material | Aluminium and plastic |
| Installation position | Vertical / Flat* |
| Galvanic isolation | YES, on both BUS/Ethernet side |
| Mechanical rating | IP20, NEMA rating 1 |
| Mounting | DIN-rail (EN 50022 standard) |
| I/O configuration | via USB port with Anybus Configuration Manager software |
| Certifications | CE., CULUS, RoHS |
Ordering Information
| Order Code | AB9002 |
|---|---|
| Deliverables | Gateway Quick Start Documentation USB Configuration Cable 不 Includes power supply Configuration software available for download |
Warranty: 3 years. For purchase instructions and terms and conditions, please contactsupport@hongtronics.com
