R5550
實時頻譜分析儀R5750-418 - Image 2
實時頻譜分析儀R5750-418 - Image 3
實時頻譜分析儀R5750-418 - Image 4
thinkRF-R5550

實時頻譜分析儀R5750-418

9kHz-18GHz，內置GNSS模塊，實時頻譜分析儀R5750-418

Enabling Wireless Situational Awareness for Mobile RF Applications with thinkRF R5750

The thinkRF R5750 Real-Time Spectrum Analyzer with GPS is built for mobile wireless situational awareness applications such as RF road-testing, coverage mapping, propagation analysis, direction finding and transmitter location, and vehicle-based spectrum monitoring. thinkRF R5750 Real-Time Spectrum Analyzer with GPS enables field engineers to deeply analyze complex waveforms while knowing the location and time of each measurement. location and time of each measurement.
Compact, lightweight and fanless, the thinkRF R5750 Real-Time Spectrum Analyzer delivers improved spectral performance, lower power consumption and increased portability for outdoor and mobile deployments. Weatherization options provide increased durability and ruggedness in challenging environments.

 

Technical Parameters

  • Frequency range: 9kHz-18GHz
  • Real Time Bandwidth (RTBW): 0.1 / 10 / 40 / 100 MHz
  • 顯示的平均噪聲電平(DANL | at 25 °C ± 5 °C, typical)：- 161 dBm/Hz~- 144 dBm/Hz
  • TOI: +12 dBm, typical
  • Up to 28 GHz/s @ 10 kHz RBW sweep rate
  • Attenuator range: 0 to 30 dB in 10 dB steps
  • SSB Phase Noise 100 Hz -90 dBc/Hz
    1 kHz -92 dBc/Hz
    10 kHz -99 dBc/Hz
    100 kHz -109 dBc/Hz
    1 MHz -118 dBc/Hz
  • Power consumption: 23W
  • Weight: 2.72kg
  • Dimensions: 257.3 x 193.7 x 66 mm
Categories: , , Tag:

Description

I. Overview

9kHz-18GHz，內置GNSS模塊，實時頻譜分析儀R5750-418

宏虹thinkRF R5750-418實時頻譜分析儀集成全球衛星導航系統(GNSS)獲取位置和時間戳信息，以創新的軟件定義無線電技術為基礎，具有傳統實驗室級頻譜分析儀的性能，而成本，尺寸，重量和功耗卻只有其小部分。便攜式無風扇虹科thinkRF R5750專為在實驗室，現場或車輛中的分佈式部署而設計，具有高性能，軟件定義的RF接收器，數字化儀和分析儀的優勢。

 

Product Features

  • Compact (257.3 x 193.7 x 60 mm), portable (2.72 kg), quiet (fanless)
  • Gigabit Ethernet-based control and communications; networked and remotely deployable real-time spectrum analyzer
  • GNSS module with embedded 10MHz reference clock source for further RTSA time synchronization
  • Wide Instantaneous Bandwidth Modern waveforms such as the 802.11ac standard utilize bandwidths occupying up to 80 M Hz of the waveform, while LTE-Advanced is designed to utilize bandwidths of up to 100 M Hz. The R5550 provides instantaneous bandwidths of up to 100 M Hz in its Direct Inverter Frequency (ZIF) mode.
  • Deep dynamic range, RF measurements used to characterize IP3 typically require a dynamic range of approximately 100 dB. The R5550 supports multiple ADCs to provide wide IBW with 70 dB dynamic range and narrow band IBW with 100 dB dynamic range.
  • Hybrid super-exception, direct-conversion and direct-digitizing RF receiver front-end (RFE)
  • 10 MHz input and output clock reference for multi-cell synchronization
  • 125 M samples/s 14-bit wideband (WB) ADC with dynamic range greater than 70 dB
  •  A 325 k samples/s 24-bit narrow-band (NB) ADC with a dynamic range of more than 100 dB
  • Xilinx's Zynq FPGAs, which feature a dual-core ARM-based processor, a Gigabit Ethernet interface and customized embedded digital signal processing (DSP) logic;
  • 1 GB DDR3 shared between firmware and real-time cache of digital data
  • General Purpose Input/Output (GPIO) Ports
  • The hardware architecture is as follows:

 

 

Technical Parameters

  • Frequency range: 9kHz-18GHz
  • Real Time Bandwidth (RTBW): 0.1 / 10 / 40 / 100 MHz
  • 顯示的平均噪聲電平(DANL | at 25 °C ± 5 °C, typical)：- 161 dBm/Hz~- 144 dBm/Hz
  • TOI: +12 dBm, typical
  • Up to 28 GHz/s @ 10 kHz RBW sweep rate
  • Attenuator range: 0 to 30 dB in 10 dB steps
  • SSB Phase Noise 100 Hz -90 dBc/Hz
    1 kHz -92 dBc/Hz
    10 kHz -99 dBc/Hz
    100 kHz -109 dBc/Hz
    1 MHz -118 dBc/Hz
  • Power consumption: 23W
  • Weight: 2.72kg
  • Dimensions: 257.3 x 193.7 x 66 mm

 

IV. Hardware interface

  • The GPIO (General Purpose Input/Output) ports support extended hardware functionality including SPI (Serial Peripheral Interface) bus, I2C serial interface, PPS (Pulse Per Second) inputs, external trigger inputs/outputs as well as specific radio front-end control and status.

 

V. APIs and Standard Agreements

Standard Agreement

  • SCPI and VITA VRT
    The R5750 supports the Standard Commands for Programmable Instruments (SCPI) for control and the VITA-49 Radio Transmission (VRT) protocol for data streaming.
    thinkRF provides a wide range of documentation and examples for programming and interfacing at the SCPI and VITA-49 VRT levels.
  • HiSLIP
    The R5750 with firmware version 1.6.1 or higher supports HiSLIP, an industry-standard TCP/IP-based protocol for remote instrument control of LAN-based test and measurement instruments.

APIs - Programming Environment

  • Python™ and PyRF Development Framework
  • NI LabVIEW
  • MATLAB®
  • C/C++ APIs and DLLs

 

Application Areas

The R55x0 is designed for standalone, remote and/or distributed wireless signal analysis. Whether used as a single device or as a network of wireless sensors, the R55x0 is ideal for monitoring, management, and transmitter surveillance, whether they are within a building or distributed over a geographic area. Applications include but are not limited to:

  • 5G Wireless Technology
  • Test Measurement
  • Spectrum Monitoring
  • RF Research
  • OEM Integration
  • Signal Intelligence and Electronic Intelligence (SIGINT / ELINT)
  • Technical Surveillance Countermeasures (TSCM)
  • Telecommunications Planning, Optimization and Management
  • Road Test

 

VII. Information Download

Hongke Real Time Spectrometer HK-R5750 Data Sheet and User's Manual

 

VIII. Accessories and Order Numbers

Order number of the standard set: R5750-418

The R5750 shipping box contains the following:

  • R5750 Real Time Spectrum Analyzer
  • Power adapters and cables
  • Direct Ethernet Cable
  • USB Console
  • Receiving Antenna
  • GNSS Antennas and Cables
  • Notes and Quick Start Guide

Same series model:

Related products