R5550
實時頻譜分析儀R5550-427 - Image 2
實時頻譜分析儀R5550-427 - Image 3
實時頻譜分析儀R5550-427 - Image 4
thinkRF-R5550

Real Time Spectrum Analyzer R5550-427

9kHz-27GHz，實時頻譜分析儀R5550-427

The thinkRF R5550 Real-Time Spectrum Analyzer is built on innovative and highly optimized software-defined radio technology to provide greater flexibility, coverage, and functionality. thinkRF R5550 Real-Time Spectrum Analyzer is designed and engineered for spectrum monitoring and deployment applications, delivering improved spectral performance in a lightweight, fanless, and portable form factor, while providing the ability to Deeply analyze complex broadband waveforms in challenging spectral environments.

 

Technical Parameters

  • Frequency range: 9kHz-27GHz
  • Real Time Bandwidth (RTBW): 0.1 / 10 / 40 / 100 MHz
  • 顯示的平均噪聲電平(DANL | at 25 °C ± 5 °C, typical)：- 160 dBm/Hz~- 148dBm/Hz（0.1GHz-27GHz）
  • TOI: +12 dBm, typical
  • Up to 28 GHz/s @ 10 kHz RBW sweep rate
  • Attenuator range: 0 to 30 dB in 10 dB steps
  • SSB Phase Noise 100 Hz -90 dBc/Hz
    1 kHz -92 dBc/Hz
    10 kHz -99 dBc/Hz
    100 kHz -109 dBc/Hz
    1 MHz -118 dBc/Hz
  • Power consumption: 23W
  • Weight: 2.72
  • Dimensions: 257.3 x 193.7 x 66 mm
Categories: , , , Tag:

Description

I. Overview

9kHz-27GHz，實時頻譜分析儀R5550-427

宏虹thinkRF R5550-427實時頻譜分析儀以創新的軟件定義無線電技術為基礎，具有傳統實驗室級頻譜分析儀的性能，而成本，尺寸，重量和功耗卻只有其小部分。Designed for distributed deployment in the lab, field or vehicle, the portable fanless ICP DAS thinkRF R5550 features the advantages of a high-performance, software-defined RF receiver, digitizer and analyzer.

 

Product Features

  • Compact (257.3 x 193.7 x 60 mm), portable (2.72 kg), quiet (fanless)
  • Gigabit Ethernet-based control and communications; networked and remotely deployable real-time spectrum analyzer
  • Wide instantaneous bandwidth, modern waveforms such as the 802.11ac standard utilize bandwidth that takes up to 80 M Hz of the waveform, while LTE-Advanced is designed to take advantage of bandwidths of up to 100 M Hz. The R5550 provides instantaneous bandwidths of up to 100 M Hz in its Direct Inverter Frequency (ZIF) mode.
  • Deep Dynamic Range: RF measurements used to characterize IP3 typically require a dynamic range of approximately 100 dB. The R5550 supports multiple ADCs to provide a wide IBW with 70 dB dynamic range and a narrow band IBW with 100 dB dynamic range.
  • Hybrid super-exception, direct-conversion and direct-digitizing RF receiver front-end (RFE)
  • The receiver front-end inputs and outputs support clock synchronization, while the IF outputs are used for high-end digitization.
  • 125 M samples/s 14-bit wideband (WB) ADC with dynamic range greater than 70 dB
  •  A 325 k samples/s 24-bit narrow-band (NB) ADC with a dynamic range of more than 100 dB
  • Xilinx's Zynq FPGAs with ARM-based dual-core processors, Gigabit Ethernet interfaces and customized embedded digital signal processing (DSP) logic
  • 1 GB DDR3 shared between firmware and real-time cache of digital data
  • General Purpose Input/Output (GPIO) Ports
  • The hardware architecture is as follows:

 

 

Technical Parameters

  • Frequency range: 9kHz-27GHz
  • Real Time Bandwidth (RTBW): 0.1 / 10 / 40 / 100 MHz
  • 顯示的平均噪聲電平(DANL | at 25 °C ± 5 °C, typical)：- 160 dBm/Hz~- 148dBm/Hz（0.1GHz-27GHz）
  • TOI: +12 dBm, typical
  • Up to 28 GHz/s @ 10 kHz RBW sweep rate
  • Attenuator range: 0 to 30 dB in 10 dB steps
  • SSB Phase Noise 100 Hz -90 dBc/Hz
    1 kHz -92 dBc/Hz
    10 kHz -99 dBc/Hz
    100 kHz -109 dBc/Hz
    1 MHz -118 dBc/Hz
  • Power consumption: 23W
  • Weight: 2.72
  • Dimensions: 257.3 x 193.7 x 66 mm

 

IV. Hardware interface

  • With I and Q output ports (IQout), it can be used to integrate RTSA's RF front-end with an external high-speed digitizer.
  • 配備了高中頻（HIF）轉換技術，旨在將頻率擴展到頻率範圍受限的接收器。R5550-418 HIF 技術將0.05-27GHz 頻率範圍內的RF（射頻）輸入信號轉換為可用於接收器的IF（中頻）信號。模擬HIF 輸出信號顯示在RTSA 的HIF OUT 端口上。
  • The GPIO (General Purpose Input/Output) ports support extended hardware functionality including SPI (Serial Peripheral Interface) bus, I2C serial interface, PPS (Pulse Per Second) inputs, external trigger inputs/outputs as well as specific radio front-end control and status.

 

V. APIs and Standard Agreements

Standard Agreement

  • SCPI and VITA VRT
    The R5550 supports the Standard Commands for Programmable Instruments (SCPI) for control and the VITA-49 Radio Transmission (VRT) protocol for data streaming.
    thinkRF provides a wide range of documentation and examples for programming and interfacing at the SCPI and VITA-49 VRT levels.
  • HiSLIP
    The R5550 with firmware version 1.6.1 or higher supports HiSLIP, an industry-standard TCP/IP-based protocol for remote instrument control of LAN-based test and measurement instruments.

APIs - Programming Environment

  • Python™ and PyRF Development Framework
  • NI LabVIEW
  • MATLAB®
  • C/C++ APIs and DLLs

 

Application Areas

The R55x0 is designed for standalone, remote and/or distributed wireless signal analysis. Whether used as a single device or as a network of wireless sensors, the R55x0 is ideal for monitoring, management, and transmitter surveillance, whether they are within a building or distributed over a geographic area. Applications include but are not limited to:

  • 5G Wireless Technology
  • Test Measurement
  • Spectrum Monitoring
  • RF Research
  • OEM Integration
  • Signal Intelligence and Electronic Intelligence (SIGINT / ELINT)
  • Technical Surveillance Countermeasures (TSCM)
  • Telecommunications Planning, Optimization and Management
  • Road Test

 

VII. Information Download

Hongke Real Time Spectrometer HK-R5550 Data Sheet and User's Manual

 

VIII. Accessories and Order Numbers

Order number of the standard set: R5550-427

The R5550 shipping box contains the following:

  • R5550 Real Time Spectrum Analyzer
  • Power adapters and cables
  • Direct Ethernet Cable
  • USB Console
  • Receiving Antenna
  • Notes and Quick Start Guide

Same series model:

Related products