Broadband Real-Time Spectrum Analyzer R5550-418-WBIQ

9kHz-18GHz，160MHz BW，實時頻譜分析儀R5550-418-WBIQ

The thinkRF R5550 Real-Time Spectrum Analyzer is built on innovative and highly optimized software-defined radio technology to provide greater flexibility, coverage, and functionality. thinkRF R5550 Real-Time Spectrum Analyzer is designed and engineered for spectrum monitoring and deployment applications, delivering improved spectral performance in a lightweight, fanless, and portable form factor, while providing the ability to Deeply analyze complex broadband waveforms in challenging spectral environments.

Technical Parameters

Frequency range: 9kHz-18GHz
實時帶寬(RTBW)：0.1 / 10 / 80 / 160 MHz
顯示的平均噪聲電平(DANL | at 25 °C ± 5 °C, typical)：- 162 dBm/Hz~- 144 dBm/Hz
TOI: +12 dBm, typical
Attenuator range: 0 to 30 dB in 10 dB steps
SSB Phase Noise 100 Hz -90 dBc/Hz
1 kHz -92 dBc/Hz
10 kHz -99 dBc/Hz
100 kHz -109 dBc/Hz
1 MHz -118 dBc/Hz
Power consumption: 23W
Weight: 2.72kg
Dimensions: 257.3 x 193.7 x 66 mm

Categories: Real Time Spectrum Analyzer, Wireless, Electronic Test / Measurement, Spectrum Analyzer Tag: Broadband Real-Time Spectrum Analyzer R5550-418-WBIQ

Description

Description

I. Overview

9kHz-18-GHz，160MHz BW，實時頻譜分析儀R5550-418-WBIQ

thinkRF R5550-418-WBIQ實時頻譜分析儀以創新的軟件定義無線電技術為基礎，具有傳統實驗室級頻譜分析儀的性能，而成本，尺寸，重量和功耗卻只有其小部分。便攜式無風扇虹科thinkRF R5550寬帶產品設計用於分析寬帶數字通信–手機標準3G / 4G / LTE，WiFi 或涉及寬帶信號的一般矢量信號分析（VSA）應用。

Product Features

Compact (257.3 x 193.7 x 60 mm), portable (2.72 kg), quiet (fanless)
Gigabit Ethernet-based control and communications; networked and remotely deployable real-time spectrum analyzer
寬瞬時帶寬，IF帶寬- 10 MHz，80 MHz，160 MHz
Hybrid super-exception, direct-conversion and direct-digitizing RF receiver front-end (RFE)
The receiver front-end inputs and outputs support clock synchronization, while the IF outputs are used for high-end digitization.
模擬量I / Q 和HIF 輸出可實現OEM 高速數字化儀
通用輸入/輸出（GPIO）端口用於外部觸發和同步

The hardware architecture is as follows:

Technical Parameters

Frequency range: 9kHz-18GHz
實時帶寬(RTBW)：0.1 / 10 / 80 / 160 MHz
顯示的平均噪聲電平(DANL | at 25 °C ± 5 °C, typical)：- 162 dBm/Hz~- 144 dBm/Hz
TOI: +12 dBm, typical
Attenuator range: 0 to 30 dB in 10 dB steps
SSB Phase Noise 100 Hz -90 dBc/Hz
1 kHz -92 dBc/Hz
10 kHz -99 dBc/Hz
100 kHz -109 dBc/Hz
1 MHz -118 dBc/Hz
Power consumption: 23W
Weight: 2.72kg
Dimensions: 257.3 x 193.7 x 66 mm

IV. Hardware interface

With I and Q output ports (IQout), it can be used to integrate RTSA's RF front-end with an external high-speed digitizer.
Equipped with High-Intermediate Frequency (HIF) conversion technology designed to extend the frequency to receivers with a limited frequency range.R5550-418-WBIQ HIF 技術將0.05-18GHz 頻率範圍內的RF（射頻）輸入信號轉換為可用於接收器的IF（中頻）信號。The analog HIF output signal is displayed on the HIF OUT port of the RTSA.
The GPIO (General Purpose Input/Output) ports support extended hardware functionality including SPI (Serial Peripheral Interface) bus, I2C serial interface, PPS (Pulse Per Second) inputs, external trigger inputs/outputs as well as specific radio front-end control and status.

V. APIs and Standard Agreements

Standard Agreement

SCPI and VITA VRT
The R5550 supports the Standard Commands for Programmable Instruments (SCPI) for control and the VITA-49 Radio Transmission (VRT) protocol for data streaming.
thinkRF provides a wide range of documentation and examples for programming and interfacing at the SCPI and VITA-49 VRT levels.
HiSLIP
The R5550 with firmware version 1.6.1 or higher supports HiSLIP, an industry-standard TCP/IP-based protocol for remote instrument control of LAN-based test and measurement instruments.

APIs - Programming Environment

Python™ and PyRF Development Framework
NI LabVIEW
MATLAB®
C/C++ APIs and DLLs

Application Areas

The R55x0 is designed for standalone, remote and/or distributed wireless signal analysis. Whether used as a single device or as a network of wireless sensors, the R55x0 is ideal for monitoring, management, and transmitter surveillance, whether they are within a building or distributed over a geographic area. Applications include but are not limited to: