Real Time Spectrum Analyzer R5550-408

Description

I. Overview

Product Features

• Compact (257.3 x 193.7 x 60 mm), portable (2.54 kg), quiet (fanless)
• Gigabit Ethernet-based control and communications; networked and remotely deployable real-time spectrum analyzer
• 寬瞬時帶寬，諸如802.11ac標準之類的現代波形利用的帶寬佔用高達80 M Hz的波形，而LTE-Advanced旨在利用高達100 M Hz的帶寬。R5550在其直接變頻（ZIF）模式下可提供高達100 M Hz的瞬時帶寬。
• 深度動態範圍:用於表徵IP3的RF測量通常需要大約100 dB的動態範圍。R5550支持多個ADC，從而提供具有70 dB動態範圍的寬IBW和具有100 dB動態範圍的窄帶IBW。

• Hybrid super-exception, direct-conversion and direct-digitizing RF receiver front-end (RFE)
• The receiver front-end inputs and outputs support clock synchronization, while the IF outputs are used for high-end digitization.
• 125 M samples/s 14-bit wideband (WB) ADC with dynamic range greater than 70 dB
•  A 325 k samples/s 24-bit narrow-band (NB) ADC with a dynamic range of more than 100 dB
• Xilinx's Zynq FPGAs with ARM-based dual-core processors, Gigabit Ethernet interfaces and customized embedded digital signal processing (DSP) logic
• 1 GB DDR3 shared between firmware and real-time cache of digital data
• General Purpose Input/Output (GPIO) Ports
• The hardware architecture is as follows:

Technical Parameters

• 頻率範圍：9kHz-8GHz
• Real Time Bandwidth (RTBW): 0.1 / 10 / 40 / 100 MHz
• Displayed Average Noise Level (DANL | at 25 °C ± 5 °C, typical): - 157 dBm/Hz~- 144 dBm/Hz
• TOI: +12 dBm, typical
• Up to 28 GHz/s @ 10 kHz RBW sweep rate
• Attenuator range: 0 to 30 dB in 10 dB steps
• SSB Phase Noise 100 Hz -90 dBc/Hz
                                  1 kHz -92 dBc/Hz
                                  10 kHz -99 dBc/Hz
                                  100 kHz -109 dBc/Hz
                                  1 MHz -118 dBc/Hz
• 功耗：17W
• 重量：2.54kg
• Dimensions: 257.3 x 193.7 x 66 mm

IV. Hardware interface

• With I and Q output ports (IQout), it can be used to integrate RTSA's RF front-end with an external high-speed digitizer.
• 配備了高中頻（HIF）轉換技術，旨在將頻率擴展到頻率範圍受限的接收器。R5550-408 HIF 技術將0.05-8GHz 頻率範圍內的RF（射頻）輸入信號轉換為可用於接收器的IF（中頻）信號。模擬HIF 輸出信號顯示在RTSA 的HIF OUT 端口上。
• The GPIO (General Purpose Input/Output) ports support extended hardware functionality including SPI (Serial Peripheral Interface) bus, I2C serial interface, PPS (Pulse Per Second) inputs, external trigger inputs/outputs as well as specific radio front-end control and status.

V. APIs and Standard Agreements

Standard Agreement

• SCPI and VITA VRT
  The R5550 supports the Standard Commands for Programmable Instruments (SCPI) for control and the VITA-49 Radio Transmission (VRT) protocol for data streaming.
  thinkRF provides a wide range of documentation and examples for programming and interfacing at the SCPI and VITA-49 VRT levels.
• HiSLIP
  The R5550 with firmware version 1.6.1 or higher supports HiSLIP, an industry-standard TCP/IP-based protocol for remote instrument control of LAN-based test and measurement instruments.

APIs - Programming Environment

• Python™ and PyRF Development Framework
• NI LabVIEW
• MATLAB®
• C/C++ APIs and DLLs

Application Areas

The R55x0 is designed for standalone, remote and/or distributed wireless signal analysis. Whether used as a single device or as a network of wireless sensors, the R55x0 is ideal for monitoring, management, and transmitter surveillance, whether they are within a building or distributed over a geographic area. Applications include but are not limited to:

• 5G Wireless Technology
• Test Measurement
• Spectrum Monitoring
• RF Research
• OEM Integration
• Signal Intelligence and Electronic Intelligence (SIGINT / ELINT)
• Technical Surveillance Countermeasures (TSCM)
• Telecommunications Planning, Optimization and Management
• Road Test

VII. Information Download

Hongke Real Time Spectrometer HK-R5550 Data Sheet and User's Manual

VIII. Accessories and Order Numbers

Order number of the standard set: R5550-408

The R5550 shipping box contains the following:

• R5550 Real Time Spectrum Analyzer
• Power adapters and cables
• Direct Ethernet Cable
• USB Console
• Receiving Antenna
• Notes and Quick Start Guide

Same series model: