Kvaser Air Bridge Light HS M12
The Kvaser Air Bridge Light HS M12 is a no-configuration wireless CAN bridge that connects to a CAN network using the dust and water resistant M12 connector.
這款設備由一對預配置的即插即用單元組成，配有集成天線和堅固外殼，在有線連接不適用或具有挑戰性的情況下（如 CAN 電纜在高環境磨損條件下）確保快速交換原始 CAN 數據。
Kvaser Air Bridge Light HS 使用專有的 2.4G 無線電和跳頻機制，控制數據速率、無線電包格式、輸出功率和配對方法，以實現可預測的延遲，同時不犧牲穩定性或範圍。傳輸範圍可達 70 米，最大數據速率為每秒 1200 條消息，數據包延遲為 4.8 毫秒。這使得 Air Bridge 在基礎設施和控制應用中非常有效，尤其是在需要精確消息傳遞時間的場合，並且在某些情況下是光纜的可行替代方案。
There are two versions of this device: (01141-0) Kvaser Air Bridge Light HS M12 is EU certified and (01148-9) Kvaser Air Bridge Light HS M12 (FCC) complies with US certification. Both versions are functionally identical but have different radio transmission schemes due to regulatory differences.
Data Sheet Download
Description
Key Features:
• Pre-configured pair of units that create a point-to-point wireless link between two CAN networks.
• 2.4 GHz proprietary protocol.
• Internal antenna design with up to 18 dBm antenna output power.
• Automatic serial transmission rate detection (125K, 250K, 500K, 1M).
• Supports 11-bit (CAN 2.0A) and 29-bit (CAN 2.0B Activity) identifiers.
• High-speed CAN connection (according to ISO 11898-2) up to 1 Mbit/s.
• Power is supplied through the CAN bus interface.
• Rugged aluminum housing.
• Each unit comes with a dust- and water-resistant M12 connector.
• Plug and play, no drivers or configuration required.
• Fully compatible with J1939, CANopen, NMEA 2000 and DeviceNet.
• Extended operating temperature range of -40 to +70 °C.
• Note: Error frames and arbitration information are not transmitted over the Air Bridge unit's wireless link.
Warranty:
2 Year Warranty. See our General Terms and Policies for details.
Support:
By contacting info@hongtronics.comAll products come with free technical support.
Certification:
• The Kvaser Air Bridge Light HS (FCC) (EAN: 73-30130-01008-6) has been tested and found to comply with Part 15 of the FCC Rules. For a complete statement of FCC compliance information, please refer to the user guide.
• The Kvaser Air Bridge Light HS (EAN: 73-30130-00808-3) has been tested and declared compliant with the relevant EU Radio Equipment Directive (RED) 2014/53/EU (Articles 3.1a, 3.1b and 3.2) and RoHS Recasting Directive 2011/65/EU (Article 4.1). For the complete EU Declaration of Conformity, please refer to the User Guide.
• Category: Cables, Interfaces, Hardware, CAN, Accessories
• certificate：CE、RoHS、FCC
• channel1
• Connectors: M12 5-pin
• Current isolationYes.
• high degree: 17 mm
• Length: 151 mm
• makings: Aluminum, PA6
• Mute Mode: No support
• Temperature Range: -40°C to 70°C
• weights: 84 grams
Download
Version 2.2.240918
Kvaser Air Bridge Installation Guide
[Download]
Version 5.0.240918
Kvaser Air Bridge Light HS User's Guide
[Download]
Version 3.0.240918
Kvaser Air Bridge System Integration Guide
[Download]
