AS-Interface Master – CANopen Slave
Anybus X-gateway讓您可以實現無縫內部連接AS-Interface和CANopen網路之間的PLC控制系統以及其所連接的設備。
Fast copying of I/O data
X-gateway的主要功能是在兩個網路間快速傳輸循環I/O數據。這讓您的PLC不用做額外的計算工作。網關作為AS-Interface網路上的主站並作為CANopen網路上的從站。該數據傳輸完全透明，每個方向最大數據容量512字節。
Simple to formulate - no programming required!
The connection between the two networks is quickly established in the Anybus Configuratuion Manager software included with the X-gateway. no programming skills are required to set up the X-gateway. By factory default, the X-gateway has a predefined I/O size of 20 bytes.
Description
Features and Benefits
- Fast recovery of cyclic I/O data between two networks (10-15 ms)
- Validated and tested by all PLC manufacturers
- Supports up to 512 bytes of input and output data in each direction.
- Powerful master interface for AS-Interface, no PLC controller required
- Optional control and status messages can be added to I/O data for diagnostic purposes.
- Rugged, self-contained housing for use in harsh industrial environments
- Free worldwide technical support and consultation
AS-Interface master interface
When an off-the-shelf AS-Interface control PLC is not available, the Anybus X-gateway with integrated AS-Interface M4 master interface can be used.
- Compliant with AS-Interface 3.0 specification
- Controls up to 62 AS-Interface slaves.
- Optional online device list showing the active status of connected slaves
- Support for Combined Transaction Types 1, 2, 3, 4, 51
- Up to 248 digital inputs and 186 digital outputs
- Up to 124 (16-bit) analog values
- AS-Interface baud rate 167 kbit/s
- Synchronized I/O (optional)
- On-Board Configuration Buttons
- 1x D-sub 9-pin male connector (RS-232) for terminal-based monitoring and configuration
- 2x 2針5,08菲尼克斯插頭連接件
CANopen從站接口
CANopen從站設置可以通過板上交換機實現，或者也可以通過導入提供的.EDS文件到控制PLC的工程工具來實現。
- 完整的CANopen從站功能根據CANopen版本4.02
- 最大512字節輸入數據和512字節輸出數據(PDO + SDO)
- 可定制的PDO映射
- 高達80 RPDO和80 TPDO
- 傳輸類型：PDO同步，狀態變更，基於事件和RTR
- 網路存儲和還原功能
- 心跳和節點保護支援
- 支援CANopen波特率10 kbit/s – 1 Mbit/s
- 通過.EDS文件或板上旋轉交換機進行CANopen配置
- 1x D-sub 9針公頭CANopen連接件
Technical Specifications
| Dimensions (L-W-H) | 114 x 44 x 127mm or 4,49 x 1,73 x 5,00″ |
| Weight | 400g or 0,880 lbs |
| Operating temperature | -25 to +65 °C or -13 to +149 °F |
| Storage temperature | -40 to +85 °C or -40 to +185 °F |
| Power supply | 24 VDC +/- 20% via 2-pole 5.08 mm Phoenix pluggable screw connector |
| Current consumption | max. 400mA (Typical 200mA) |
| Enclosure material | Aluminium and plastic |
| Installation position | Vertical / Flat* |
| Galvanic isolation | YES, on both BUS/Ethernet side |
| Mechanical rating | IP20, NEMA rating 1 |
| Mounting | DIN-rail (EN 50022 standard) |
| I/O configuration | via USB port with Anybus Configuration Manager software |
| Certifications | CE., CULUS, RoHS |
Ordering Information
| Order Code | AB7827 |
|---|---|
| Deliverables | Gateway Quick Start Documentation USB Configuration Cable 不 Includes power supply Configuration software available for download |
Warranty: 3 years. For purchase instructions and terms and conditions, please contactsupport@hongtronics.com
