Anybus PROFIBUS to .NET Bridge
NET bridge serves as a bridge between the PLC function modules and the .NET solution in the PC.
Working Principle
The exchange of information between the Operational Technology (OT) side and the Information Technology (IT) side is accomplished through messaging.
Up to 65535 different message types, each with a maximum of 251 bytes, may be defined. Each message type has a unique ID number and these messages are sent in sequence to the same IO data, which provides a large amount of data communication.
These message types are defined in a spreadsheet template (Microsoft Excel), which is included in the configuration software, along with the function modules and product definition files (GSD, GSDML, EDS, ESI). Using the spreadsheet templates, Anybus .NET Bridge Code Generator creates C# files for .NET programmers and PLC files for PLC programmers.
Description
I. Features and Benefits
- Create a bridge between PLC logic and PC's .
- Synchronized communication through handshaking
- Two-way communication
- Very simple to configure and provides easy-to-use simulation tools.
- Data configuration is separated into a separate spreadsheet.
- Minimal or no hardware required - easy to replace
- Transfers large amounts of data
- DIN-rail or wall mounting options available
- Up to 65,535 different unique message types
PROFINET network characteristics
PROFIBUS從站參數是在一個電子表格配置中定義的。配置生成器生成GSD和功能模塊。
- 分配最多244字節的I/O數據
- 波特率12 Mbit/s
- 通過.GSD文件進行PROFIBUS上行配置
- Functional Modules for TIA Protherm
- 通過1個母頭D-Sub9連接件連接
For automation specialists - PLC program operators
Function blocks simplify PLC integration!
- NET Framework knowledge is not required - the logical interface is a function block in the PLC.
- The generated configuration already provides Studio 5000-oriented function blocks.
- Auto-Configuration - System Generates Fully Customized EDS Files
- NET emulation for testing/developing PLC solutions without .
- If a gateway needs to be replaced, the .NET application will automatically create the configuration
For IT specialists - .
Significantly reduces integration complexity!
- No need to understand the industrial network - data from the factory floor is sent in an intelligent mode
- IT Form Interface: Customized name, receive events and publish structured data via C#/.NET interface
- Auto-Configuration - System Generation of Fully Customized C# APIs
- The name and data type are consistent with the PLC programmer according to the parameter list, and the configuration is saved in the C# program.
- No PLC required, PLC emulation for testing/developing .
- No configuration work on the bridge
Technical Specifications
| Dimensions (L-W-H) | 110 x 35 x 101 mm or 4,33 x 1,38 x 3,98″ | |
| weights | 160g or 0,35 lbs. | |
| Working Temperature | -25 to +70 °C or -13 to +158 °F | |
| Storage Temperature | -40 to +85 °C or -40 to +185 °F | |
| Power supply | 24 VDC | |
| Current consumption | Classic 150mA | |
| USB port | For firmware upgrades | |
| SD memory card slot | For backup, configuration and simple replacement | |
| PC Connectors | 1x RJ45 | |
| Fieldbus/Ethernet Connectors | (Check out the details of the secondary network interface above) | |
| Electrical isolation | Both bus/Ethernet side | |
| Mechanical Grade | IP20, NEMA rating 1 | |
| Installation | DIN rail mounting (EN 50022 standard) or wall mounting (optional) | |
| Certificates | CE， |
Ordering Information
Order No. | AB9071 | |
|---|---|---|
| included element | Anybus PROFIBUS到.NET網關 | |
| promise to keep sth. in good repair | 3 years |
For purchase instructions and terms and conditions, please contactsupport@hongtronics.com
