Anybus Communicator - EtherNet/IP adapter - EtherCAT slave
Anybus Communicator EtherNet/IP適配器– EtherCAT從站是一種工業協議網關，允許您通過EtherNet/IP和EtherCAT網路在PLC控制系統之間無縫傳輸數據。
Anybus Communicator is designed to ensure reliable, secure and high-speed data transfer between different industrial Ethernet and fieldbus networks. The stand-alone gateway is easy to install and deploy, enabling transparent data exchange between PLCs, allowing you to bridge and integrate legacy devices into modern high-performance networks with no hardware and only minor software changes.
Anybus Communicator 使用屢獲殊榮且經過驗證的Anybus NP40工業網路處理器構建，提供網路一致性，高性能和可靠性。 在不同網路上的PLC之間連接時，可實現極快的數據循環，每個方向的數據傳輸高達1500字節，滿足大多數當前的控制應用需求並支持未來的需求。
Intuitive configurations, easy-to-understand documentation, and smart hardware and enclosure design ensure quick installation.
Description
I. Features and Benefits
Superior performance
- Real-time data transfer –The time required to transfer data between two PLCs consists of the cycle time on the first network plus the cycle time on the second network. The internal data transfer in the communicator is negligible because it corresponds to the natural variation of the network cycle time (jitter).
- Hardware-accelerated byte-order conversion (byte-switching)- Communicator可通過硬件加速字節序轉換來更改數據表示（字節序），以確保數據在每個PLC 中正確呈現。你甚至可以以不同的方式轉換數據區域的不同部分以處理不同的數據類型。它對性能沒有影響，減輕數據轉換任務的PLC負擔，簡化了PLC編程。
Easy to use
- Dedicated Ethernet configuration port - no special cables required.
- Intuitive web-based drag-and-drop configuration interface - no need to install any additional software.
- The forward-facing ports make connecting cables easy, and the slim form factor saves space on the DIN rail.
- Troubleshoot problems with powerful diagnostic features including real-time data monitors, status screens and support packages.
Latest Safety Features
- Secure boot feature detects firmware tampering and defends against malware attacks and infections.
- A security switch that locks your configuration and prevents any unauthorized access.
- The ports used in production have been disabled to prevent loading of malware through the ports.
Designed for industrial environments
- Rugged and compact housing.
- Industrial components are tested and certified according to CE and UL.
- Wide temperature range of -25°C to 70°C.
- DIN-rail mounting allows for installation near the connected equipment, reducing the amount of wiring.
二、ETHERNET/ IP characterization
Technical Specifications
- EtherNet/IP 適配器模式
- EtherNet/IP傳輸最多1448字節
- 數據連接1類和3類
- EtherNet/IP CONFORMANCE TESTED™ by ODVA
- 設備級環網(Device Level Ring )(beacon mode)
- Quick Connect class B
- 雙RJ45乙太網端口，10/100 Mbit全雙工
- 帶集成交換機的菊花鏈
Three,EtherCAT characterization
- EtherCAT slave according to IEC 61158 Type 12 (ETG.1000)
- Transfers up to 1486 bytes over EtherCAT.
- Network cycle time as low as 100 μs
- Support for EtherCAT-based CANopen
- Addressing Modes: Logic, Nodes, and Locations
- Commands: APRD, armw, APWR, BRD, BWR, FPRD, FPRW, FPWR, FRMW, LRD, LRW, LWR
- Synchronization mode: free running
- Dual RJ45 Ethernet ports with 10/100 Mbit Full Duplex
- Daisy chain with integrated switch
Technical Specifications
normal practice
| Dimensions (L x W x H) with serial and power connectors | 98 x 27 x 144 mm 3.85 x 1.06 x 5.67 in. |
| weights | 150 grams, 0.33 pounds |
| Buttons and Switches | Reset button and safety switch |
| Light Emitting Diode | Gateway, Network 1 and Network 2 |
| Intellectual Property Level | IP20 Protection Rating |
| Shell Material | Computer ABS, UL 94 VO |
| Installation | Guide rails (35 * 7, 5/15) |
Environment
| Working Temperature | -25 to 70° C, -13 to 158° F |
| Storage Temperature | -40 to 85° C, -40 to 185° F |
| Relative Humidity | 0-95% Non-condensing |
| Mounting Height | Up to 2,000 m |
Power supply
| Input Voltage | 12 - 30 VDC |
| Current consumption | Typical: 160 mA @ 24V Maximum: 400 mA @ 12V |
| Power Connector | 3-pin plug with screw terminals |
| Protection | Reverse voltage protection and short circuit protection |
Ethernet port
| harbor | 2+2 x Aethernet |
| isolation | Current isolation |
| bitrate | 10/100 Mbit full duplex |
| Connectors | RJ45 |
| Open and Close。 | Dual-Port Pass-Through Switch |
乙太網/IP
| paradigm | 適配器（從屬） |
| 消息 | 隱式和顯式 |
| 最大掃描儀連接數 | 1 個輸入/輸出（獨占所有者） 3 只聽或只輸入 |
| Input Data Size | 1 448 字節（大正向打開） |
| Output Data Size | 1 448 字節（大正向打開） |
| Network Redundancy | Device Level Ring (DLR), based on beacons |
| Quick Connect | B 類 |
| Certificates | 待定 |
| Minimum cycle time | 1 類連接為1 毫秒，3 類連接為100 毫秒 |
| EDS 文件 | usability |
ETHERCAT
| paradigm | Ethernet slave according to IEC 61158 Type 12 (ETG.1000) |
| Addressing Mode | Logic, Node and Location |
| synchronous mode | run free |
| Input Data Size | 1,486 bytes |
| Output Data Size | 1,486 bytes |
| Network Redundancy | Device Level Ring (DLR), based on beacons |
| Minimum cycle time | 100 microseconds |
| special feature | Supports EtherCAT-based CANopen (CoE) |
| ESI Documentation | usability |
Certifications and Standards
| UL | C UL US file number E214107 |
| CE | 2014/30/EU |
| KC | RR-ABJ-Communicator |
| EMC | EN 61000-6-2 EN 61000-4-2 EN 61000-4-3 EN 61000-4-4 EN 61000-4-5 EN 61000-4-6 EN 61000-6-4 EN 55032 |
| Environment | IEC 60068-2-1 Ab IEC 60068-2-2 Bb IEC 60068-2-1 Ab IEC 60068-2-2 Bb IEC 60068-2-14 Nb IEC 60068-2-30 Db IEC 60068-2-78 Cab IEC 60068-2-78 Cab |
| Vibration and Shock | IEC 60068-2-27 IEC 60068-2-6 |
| Scrap Certification | WEE |
configure
| GSDML Documentation | practicable |
| Configuration Software | Web-based configuration |
| Configure the port | Dedicated 10/100 Mbit RJ45 Ethernet configuration port and EtherNet/IP port |
safety
| Safety Guidance | Ensure Software Authenticity |
| Safety Switch | Enable/disable physical switch access to web-based configuration interface |
Packaging
| Content | Gateways, Power Connectors, Serial Connectors, Activation Guides, Compliance Information Sheets |
| Box material | Hardboard |
Mean Time Between Failures
| MTBF | > 1500000 h, Telcordia Method I Case 3 at 30° C |
