New heights for industry benchmarks
LED interface
The new LED display is intuitive and simple.
Two easy-to-read bar LED displays provide immediate CAN communication status: bus load, error codes.
Electrical Stability
When connected to systems with different potentials, the Kvaser U100 reduces errors caused by current leakage that can interfere with measurements made by the test system. The Kvaser U100 is electrically and physically safe and can withstand longer periods of voltage stress than other interfaces.
Ruggedized design
Supporting operation in harsh environments, it is IP67 waterproof and dustproof, and has been verified to pass a 60-second galvanic isolation test at 5,000 AC RMS, and operates at temperatures from -40°C to +85°C.
Enhanced compatibility
Compatible with J1939, CANopen, NMEA 2000 and DeviceNet. supports Windows and Linux (including SocketCAN).
”indestructible, unafraid of challenges.”
As the most flexible, rugged, and intuitive rugged CAN bus analyzer Kvaser has ever built, in addition to?Classic U100、?Precision version U100PIn addition, application-specific connectors are now available to support applications in harsh environments such as marine, heavy-duty trucks and trailers, as well as the broader automotive sector. The new connectors are as follows.
U100-X1
The Kvaser U100-X1 (01266-0) is equipped with a 9-pin J1939-13 Type II CAN connector for heavy-duty trucks and other scenarios.
? Click to learn about products
U100-X2
The KVASER U100-X2 (01267-7) is connected to CAN via a 5-pole M12 connector and is suitable for use in marine, construction and mining machinery.
? Click to learn about products
U100-X3
The Kvaser U100-X3 (01268-4) is equipped with a 16-pin OBDII plug for use in scenarios such as automotive diagnostics.
Main Product Performance Parameters
- Supports CAN FD, up to 8 Mbit/s (correct physical layer required).
- Supports 11-bit (CAN 2 .0A) and 29-bit (CAN 2.0B active) identifiers.
- Connect the power supply from the USB port.
- Supports bit rates from 10 Kbit/s to 1 Mbit/s.
- Lightweight glass-fiber reinforced polyamide shell with thermoplastic elastomer TPE overmolding.
- The housing is IP67 rated.
- DB-9 connector (other connectors will be available soon).
- Smart LED user interface.
- Reinforced current isolation, this design has been verified at 5000 V AC rms for 60 seconds.
- Industrial Grade Operating Temperature Range: -40 °C to +85 °C.
- 20000 msg/s, time stamp accuracy is 100 microseconds.
- SocketCAN is supported.
- Compatible with J1939, CANopen, NMEA 2000® and DeviceNet.
- Fully compatible with applications programmed for other Kvaser CAN hardware via Kvaser CANlib.
In addition, the exact version of the U100P also supports the followingMute ModeIt allows the device to monitor the bus without interference, andMagiSync™ , Realize timestamp synchronization of multiple Kvaser devices with MagiSync™ (no additional wiring is required to enable the devices).
↓↓ Welcome to contact us ↓↓
