Simulyzer SPI模擬器

SPI Emulator

Function Overview:

SPI-Simulyzer 是一款先進的 SPI 模擬器，專為感測器開發與測試而設計。其提供 USB 2.0 介面，支援高達 16 MBit/s 的傳輸速率，並可進行數據記錄與模擬幹預。此模擬器具備 SPI 數據視覺化工具，支持時間戳記的數據匯出，並提供多種格式（如 .csv 和 .tdms）進行後續處理。該設備兼容 Windows 和 Linux 系統，並支援 API、LabVIEW Lib 進行二次開發，適用於多種應用場景，如 HiL 模擬、安全氣囊控制單元測試和汽車電子感測器系統。

Category: Tag:

Description

SPI Emulator

SPI-Simulyzer是一個介面盒，一方面可以快速輕鬆地讀取數據，另一方面可以使用仿真數據主動幹預過程。

- Simplified Sensor Technology Development

- Visualization/Analysis Tools in DSI Software

- Test and simulation capabilities

Basic Parameter Information

  • Provides USB 2.0 interface as well as connectivity for control unit and sensors.
  • Powered by USB or external plug-in power supply unit
  • Compatible with Windows-7 +10, Microsoft .NET Framework 2.0, Linux (API only, no GUI) systems.
  • SPI的數位記錄，每秒48兆取樣
  • 支援以.csv檔案（Excel） 和.tdms 檔案（NI）格式匯出數據
  • SPI波特率：作為控制設備，速度高達16 MBit/s，作為感測器，速度高達8 MBit/s
  • 模式：幀外或幀內SPI
  • Standard Windows Gui application (optional): The protocol-specific Gui application provides a wide range of settings, from signal definitions, serial transfer rates, and error detection to triggered events. visualization of DSI bus communications helps troubleshooting and can also be easily saved. dSI data is time-stamped, so data can be imported and exported.
  • API-ANSI-C (included in box)
  • LabVIEW Lib (optional)
  • 聯繫宏虹獲取最新版本的配套軟體

Order No.

  • 2.1001  SPI-Simulyzer USB-Box V2.1,1通道，單端接口，1.2V。 5.5V，用於使用DLL進行分析+仿真

  • 2.1101  SPI-Simulyzer USB-Box V2.0,1通道，LVDS接口，用於使用DLL進行分析+仿真

  • 2.2001 可選CAN介面– SPI Simulyzer

  • 2.2002 選購的第二SPI通道分析+感測器仿真

  • 2.3001  Windows 軟體套件SPI Simulyzer Analysis + Sensor Simulation（Simulyzer-Box 或PC-ID 綁定許可證）

  • 2.3002  SPI感測器型號軟體許可;每個PC 工作站和每個感測器型號。 （Simulyzer-Box 或PC-ID 綁定許可證）

  • 2.4001  SPI-Simulyzer 配電板，用於控制器和3 個接口，帶3x 帶狀電纜

  • 2.4002  SPI-Simulyzer 配電板– 通用– 用於ECU 和1 個接口

  • 2.4003  SPI-Simulyzer 配電板，用於ECU 和1 個帶狀電纜的接口

  • 2.4101  SPI-Simulyzer LVDS 單端Pod，附2m 電纜

  • 9.0001  Simulyzer 盒子的可選保固期延長至3 年

  • 9.0011  LabView-2016 library, 32-bit or 64-bit. PC-ID or Box-SN Binding License

  • 9.0012  LabView-2016 library, 32 or 64 bit, company license

HiL Simulation of Airbag Control Unit

To build a complete HIL simulation of the airbag ECU, the internal acceleration sensor signal (SPI) of the ECU is connected to the external acceleration and pressure sensor signal (PSI5). Additionally, the ignition timing can be measured and analyzed using a SQUIB box, and the simulator can be connected to a PC system via a USB port or network for data processing.

Typically, up to six or more PSI5 Simulyzer modules operate in conjunction with multiple SPI Simulyzer modules. In order to coordinate these modules, there is a high level configuration that determines which Simulyzer is used, which signal paths are assigned, and a detailed configuration that sets the bus parameters. This high-level configuration makes the operation of the API very simple. At the same time, continuous monitoring of sensor signals is possible, ensuring the accuracy and efficiency of the simulation process.

序列週邊介面

序列週邊介面（SPI）是汽車感測器技術中常見的匯流排系統。 ECU和周邊感測器根據主從原理相互連接。每個站點都連接到串行時脈（SCLK）、MISO 和MOSI 線路。主站透過串行時鐘同步通訊。

• 主從連接的級聯或星形連接

• 設定輸出或讀入訊號邊緣資料的位置

• 選擇先傳輸MSB 還是LSB

Honghong will provide you with any support you need!

Our professional Honghong team will be the first to respond and provide you with the best service to solve all your problems.

Related products