EtherNet/IP to Serial Linking Device
Connect any RS-232/422/485 serial device to a CONTROLLOGIX® or COMPACTLOGIX® controller with an ETHERNET/IP interface.
The Linking Device acts as an intelligent protocol converter, presenting serial data to the Logix PLC in the form of easier-to-handle I/O data. This eliminates the need for additional calculation work on your PLC.
Convert any type of serial data
With its unique integration with Studio 5000® Logix designer, any content, including serial network configurations, can be accessed within Studio 5000. No additional third-party software or certificates are required, and no programming is necessary.
Connected, configured, successful!
EtherNet/IP Linking Devices are configured using a customized plug-in file for Studio 5000 Logix Designer, which dynamically generates data structures for each connected device. No ladder logic file is required (plug-in note).
It also supports automatic generation of named and structured Studio 5000 controller tags, eliminating the need to create alias tags.
Description
I. Features and Benefits
- Enables retrofitting of existing serial RS-232/422/485 devices to accommodate Logix PLCs using EtherNet/IP.
- No hardware or software modifications are required for the connected devices.
- Up to 31 serial nodes can be connected via RS-485
- Up to 500 bytes of input data and 496 bytes of output data
- Accelerated configuration through seamless integration with Studio 5000 Logix Designer
- Compatible with all ControlLogix and CompactLogix PLCs with EtherNet/IP support
- Easy configuration and no programming required through customized expansion kits
- Everything can be configured with Studio 5000, no third-party software or certificates required!
II. EtherNet/IP Interface Features
Linking Device with the latest ODVA EtherNet/IP adapter features
- Dual EtherNet/IP ports 10/100Mbit, full or half duplex operation
- Supports beacon based DLR (Device Level Ring) and wireline network topology
- Supports multiple (owner-exclusive) I/O connections (max. 10)
- After ODVA EtherNet/IP Conformance Testing
Technical Specifications
| sizes | 120 x 75 x 25 mm or 4,72 x 2,95 x 1,06″ | |
| weights | 150g, 0,33lb | |
| Working Temperature | 0 to +55 °C or 0 to +131 °F | |
| Storage Temperature | -40 to +85 °C or -40 to +185 °F | |
| Power supply | 24 VDC +/- 10% | |
| Current consumption | 300 mA maximum (normally 100 mA) | |
|---|---|---|
| Shell Material | PC ABS, UL94 | |
| Mounting Position | Vertical Installation | |
| Electrical isolation | Yes, bus/Ethernet side both | |
| Mechanical Grade | IP20, NEMA rating 1 | |
| Installation | DIN-rail mounting (EN 50022) or wall mounting | |
| serial baud rate | 1,2-57,6 kbit/s | |
| EtherNet/IP Baud Rate | 10/100 Mbit/s self-test | |
| EtherNet/IP Connectors | 2x RJ45 | |
| EtherNet/IP address | Any valid IP address can be used | |
| TCP/IP Settings | Configuration through web pages, configuration tools, DHCP/ARP or through DIP switches | |
| Certificates | ODVA, CE., |
Ordering Information
Ordering Information and Terms and Conditions:
| Order No. | HMS-EN2SE-R |
|---|---|
| included element | HMS-EN2SE-R Linking Device, Installation Guide. |
| Optional Accessories | USB-RS-232 Configuration Adapter (Order No. 019570) |
| promise to keep sth. in good repair | 3 years |
For purchase instructions and terms and conditions, please contactsupport@hongtronics.com
