Angis 超緊湊可連續生產的微型皮秒雷射器
提供市場上首款皮秒微型雷射器！具備增益切換的 1064nm 皮秒微型雷射器特性。具備1μJ脈衝能量，<50ps的短脈衝持續時間，重複頻率高達10KHz，單808nm泵浦源用於880nm泵浦雷射器和1064納米前置放大器。
Description
Product Description
友思特最新雷射器產品——A系列 Angis 雷射器，具備增益切換的 1064 nm 皮秒微型雷射器特性。1 μJ 脈衝能量(第一放大級 >100 μJ)，< 50 ps 的短脈衝持續時間，重複頻率高達 10 KHz，單 808 nm 泵浦源用於 880 nm 泵浦雷射器和 1064 nm 前置放大器，適用於連續生產。
Advantages and Features
- 超緊湊，被動或主動 Q 開關，可連續生產
- 1 μJ脈衝能量(第一放大級後 >100 μJ)
- Short pulse duration< 50 ps (< 20 ps 可用)
- 無半導體調製器(SESAM)，無模式鎖定
- 重複頻率高達 10KHz
- 單 808 nm 泵浦源用於 880 nm 泵浦雷射器和 1064 nm 前置放大器
Applications
Laser Induced Breakdown Spectroscopy (LIBS)
LIBS:Using laser pulse to penetrate the sample material and generate plasma.This is a technique for determining the chemical elemental composition of a sample by analyzing the spectral information in plasma.
The LIBS Advantage:
- No sample preparation required
- Non-Contact
- Multi-element analysis
- immediacy
Laser Surface Cleaning
Realization of laser surface cleaning:
The heat generated by the laser beam loosens, breaks up, evaporates or strips away contaminants.
Advantage:
- Non-Contact
- highly accurate
- high efficiency
- controllability
- Environmentally Friendly
Laser Scar Revision
Repair method:
- Photothermal effect: Laser light breaks down scar tissue and promotes new collagen production.
- Photochemical effects: changes in chemical structure and pigmentation
- Stimulates cell growth: stimulates cell growth and regeneration in the skin
Why Laser Scar Revision?
- non-invasive
- Accuracy
- Adjustability
Time-Resolved Fluorescence Detection
Time-Resolved Fluorescence Detection: To study the fluorescence properties of molecules, compounds or samples and to measure the characteristics of fluorescence emission in a time-resolved manner, the MNL1342 provides short pulse duration, high pulse energy and high repetition frequency for laser scar revision.
Excitation - Emission - Time Measurement
Advantage:
- high resolution
- Fluorescent Life Measurement
- high sensitivity
- optical resolution
- No marking required
Other Applications
- DNA analysis
- Pollution Monitoring
- remoteness
- Hypercontinuous Spectrum Generation
- Mixed Gas Ignition
1. All specification parameters are subject to change due to continuous optimization. All parameters are measured at 1064 wavelengths unless otherwise specified.
2. FWHM measured at 1064 wavelengths. Other pulse widths available
3. Average measurement interval 60s
4. 8 hours of testing, the longest warm-up 5 minutes, the external temperature change is less than ± 2 ℃.
5. The factory default setting is maximum repetition rate.
6. Full angle measurement at 1/e² position
7. RMS value measured at 1000 frames per second for 5 sequences of photography
8. Velocity of light measured at 1/e² in diameter, 20 cm from the laser output.
9. Finger modulation Q triggers a rising pulse.
10. The laser can be adapted to a 12 VDC power supply.
