PXI Thermocouple Emulation 41-760-002 24-Channel

Description

Overview

The series of PXI thermocouple emulator modules are available with a choice of 32, 24, 16, or 8 channels-each channel provides low-voltage outputs on two connector pins, and is capable of providing ±20mV with a resolution of 0.7µV, ±50mV with a resolution of 1.7µV, ±100mV with a resolution of 3.3µV, and covers most thermocouple types.

These thermocouple simulators use two-wire outputs with a remote output reference sense to ensure that the modules provide accurate low-level voltages even when common mode voltages are present in the system. In addition, each analog channel can be provided with an open-circuit setting to simulate a miswired connection to the sensor.

To improve accuracy, each channel of the low voltage source carries accurate calibration data stored on the module. The module also includes a calibration multiplexer for module testing and verification purposes.

Key Features

• 32, 24, 16 or 8 channel low voltage source
• Ideal for thermocouple simulation
• +/- 100mV, +/-50mV and +/- 20mV output ranges
• 0.7μV voltage resolution (+/- 20mV range)
• Two-wire outputs per channel
• Remote sensing technology breaks through ground loops
• Open Circuit Simulation
• Supported in PXI or LXI chassis
• Kernel and VISA Drivers
• Three-year warranty

Product Specification

If specifications are not available, refer to the product data sheets in this section.

Please note: In some cases, for products like our expandable LXI chassis, the specifications for the associated plug-in modules that plug into these chassis can be found in the datasheet. To find these modules, go to the “Also in scope” link above.

Download