These thermocouple simulators use two-wire outputs with a remote output reference sense to ensure that the modules provide accurate low-level voltages even when common mode voltages are present in the system. In addition, each analog channel can be provided with an open-circuit setting to simulate a miswired connection to the sensor.<\/p>\n
To improve accuracy, each channel of the low voltage source carries accurate calibration data stored on the module. The module also includes a calibration multiplexer for module testing and verification purposes.<\/p>\n
Key Features<\/h2>\n
\n
32, 24, 16 or 8 channel low voltage source<\/li>\n
Ideal for thermocouple simulation<\/li>\n
+\/- 100mV, +\/-50mV and +\/- 20mV output ranges<\/li>\n
0.7\u03bcV voltage resolution (+\/- 20mV range)<\/li>\n
Two-wire outputs per channel<\/li>\n
Remote sensing technology breaks through ground loops<\/li>\n
Open Circuit Simulation<\/li>\n
Supported in PXI or LXI chassis<\/li>\n
Kernel and VISA Drivers<\/li>\n
Three-year warranty<\/li>\n<\/ul>\n
<\/h2>\n
Product Specification<\/h2>\n
If specifications are not available, refer to the product data sheets in this section.<\/p>\n
Please note: In some cases, for products like our expandable LXI chassis, the specifications for the associated plug-in modules that plug into these chassis can be found in the datasheet. To find these modules, go to the \u201cAlso in scope\u201d link above.<\/p>\n